NEFF U1461S2GB, How To Connect

Page: 21 / 32

21
Cleaning and Care – Main oven
Hydroclean system:
x
The hydroclean system featured in your
oven is intended to help you keep your oven
neat and tidy. An amount of cleaning
solution is vaporised automatically. The
combined effects of heat and steam soften
the grease deposits on the oven wall
enamel and facilitate their removal.
Caution:
❑
Use this function only after the oven has
completely cooled (Room temperature).
❑
Use normal water only, and not distilled
water.
Activate hydroclean:
1. Remove the roasting pan from the oven.
The wire shelf may remain in the oven.
2. Pour approx. 400 ml (
3
/
4
pint) of water
mixed with a little washing up liquid into
the floor pan of the oven cavity.
In the case of heavy soil build-up, you
may wish to allow the cleaning solution
to soak in for a while before you activate
the cleaning function.
3. Close the oven door.
4. Turn the function selector to the
x
position. Both the oven cleaning and
oven temperature control lamps will light.
After the heating time has passed (4
minutes), the oven temperature control
lamp extinguishes. After another 17
minutes, the end of the cleaning cycle is
indicated by an audible signal.
Deactivate oven cleaning function:
Turn the function selector to the 0 position.
The oven cleaning control lamp
extinguishes.
●
●
50
100
150
200
250
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
0
Function selector Temperature selector
with control lamp
Control lamp
Hydroclean system