en
Time-setting options
12
10.2 Activating PowerMove
Requirement:
Only place one item of cookware on a
flexible zone.
1.
Select one of the two cooking zones in the flexible
zone.
2.
Press .
a
and the power level for the area in which the con-
tainer is located light up.
a
The function is switched on.
Note:
You can change the power levels during cook-
ing.
10.3 Deactivating PowerMove
▶
Touching
a
goes out.
a
The function has been deactivated.
11 Time-setting options
Your hob has various functions for setting the cooking
time:
¡
Switch-off timer
¡
Timer
¡
Runtime
11.1 Switch-off timer
Allows you to program a cooking time for one or more
cooking zones. Once the time has elapsed, the cook-
ing zone is automatically switched off.
Switching on Switch-off timer
1.
Select the cooking zone and the power level.
2.
Press
.
a
The
indicator for the hotplate will light up.
3.
Use TwistPad® to select the cooking time.
a
The cooking time begins to count down.
a
Once the cooking time has elapsed, the cooking
zone switches itself off and an audible signal
sounds.
Note:
When you set a cooking time for a cooking zone
in which the Frying Sensor is activated, the cooking
time will not start counting down until the selected tem-
perature level has been reached.
Changing or switching off Switch-off timer
1.
Select the cooking zone and touch
.
2.
Use TwistPad® to change the cooking time or set to
to delete the cooking time.
11.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
1.
Touch .
2.
Use TwistPad® to select the required time.
3.
Press to confirm.
a
The time begins to count down.
a
An audible signal sounds and the displays flash
once the time has elapsed.
Changing or switching off the Timer
1.
Touch .
2.
Change the running time using TwistPad® or set to
to delete the running time.
3.
Press to confirm.
11.3 Runtime
The stopwatch function displays the time that has
elapsed since activation.
Switching on Runtime
▶
Touch .
a
light up.
a
The time begins to count down.
Switching off Runtime
▶
Touch .
a
The displays for the run time programming function
go out.
a
The function has been deactivated.
