NEFF T68.F6 series, Instruction Manual, Page: 12 / 44

en
Operating the appliance
12
Cooking modes menu
The hob has a number of different cooking modes.
To access the cooking modes menu, touch the
¢ symbol in the status bar.
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch
the hotplate if the residual heat indicator is lit.
The following will be shown depending on the amount
of residual heat:
■
Residual heat high
■
Residual heat low
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
The residual heat indicator will light up when you switch
off the hotplate. Even after the hob has been switched
off, the residual heat indicator will remain lit as long as
the hotplate is still warm.
1
Operating the appliance
Operating the appliance
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
First-time use
When you switch on the appliance for the first time, the
language options menu will appear on the display
panel. Set the language that you require.
The main screen will then be displayed.
Note:
You can change the language at any time.
Further information on setting the language can be
found in the section entitled
~
"Basic settings" .
Switching the hob on and off
Switch the hob on and off using the main switch.
To switch on: Touch the
# sensor. A signal sounds and
the touch display lights up. After a short switch-on time,
the hob will be ready for operation.
To switch off: Touch the
#
symbol until the indicator
beside the main switch goes out. The residual heat
indicator remains lit until the cooking zones have
cooled down sufficiently.
Notes
■
The hob automatically switches off if all cooking
zones have been switched off for more than
20 seconds.
■
The selected settings are stored for 10 minutes after
the hob has been switched off. If the hob is switched
back on within this time, the previous settings are
retained. Section
~
"Basic settings" contains
information about changing the time in which the
selected settings are saved.
Setting the cooking zone
Set the required power setting from 1 to 9.
Power setting 1 = lowest setting.
Power setting 9 = highest setting.
Each power setting has an intermediate level.
Cooking modes Function
~
Power level Allows you to select the heat setting for
the cooking zone.
£
Cooking assis-
tant
A preset list of dishes for frying and boil-
ing.
Û Frying sensor The hob automatically detects the tem-
perature as frying progresses.
|
PowerMove The temperature can be adjusted by
changing the position of the cookware
on the cooking zones.