NEFF T3 B4 Series, Instruction Manual

Page: 13 / 24

Time-setting options
en
13
O
Time-setting options
Time-setting options
Your hob has two timer functions:
■
Programming the cooking time
■
Kitchen timer
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1.
Select the hotplate and the required heat setting.
2.
Touch the 0 symbol. Ú lights up in the display for
the hotplate. ‹‹ appears in the timer display.
3.
Touch the @ or A symbol. The basic setting
appears:
@
symbol: 30 minutes.
A
symbol: 10 minutes.
4.
Use the
@
or
A
symbol to select the required
cooking time.
After a few seconds, the time begins to elapse.
Note:
The same cooking time can be set automatically
for all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically programming
the cooking time in section
~
"Basic settings"
Changing or deleting the time
Select a hotplate. Touch the
0
symbol and use the
@
or
A
symbols to change the cooking time, or set the
time to
‹‹
.
Once the time has elapsed
The hotplate switches off. A beep sounds and in the
time program function display
‹‹
appears for
10 seconds. The
Ú
indicator on the hotplate lights up.
Pressing the
0
symbol turns off the indicators and
stops the beeping.
Notes
■
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
■
You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure:
1.
The kitchen timer can be set in two different ways:
– If a hotplate has been selected, touch the
0
symbol twice.
– If no hotplate is selected, touch the
0
symbol.
The
Ú
display beside the
U
symbol lights up.
‹‹
appears in the timer display.
2.
Touch the
@
or
A
symbol. The basic setting
appears.
@
symbol: 10 minutes.
A
symbol: 05 minutes.
3.
Use the
@
or
A
symbol to set the required time.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the symbol
0
repeatedly until the display
Ú
lights up beside the symbol
U
. Change the time or use
the symbols
@
or
A
to set the time to
‹‹
.
Once the time has elapsed
A warning signal sounds.
‹‹
is displayed on the time
program function display. After 10 seconds the
indicators turn off.
Pressing the
0
symbol turns off the indicators and
stops the beeping.