NEFF T27DA Series, Instruction Manual

Page: 6 / 16

en
Getting to know your appliance
6
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to
work correctly. Do not swap the burner caps around.
Always remove the pan supports carefully. When
moving a pan support, the pan supports next to it may
also move.
Residual heat indicator
Every burner on the hob has a residual heat indicator
that indicates whether it is hot or warm.
If
•
appears in the display the burner is still hot. As the
burner cools down further, the display changes to
œ
.
The display remains lit until the burner has cooled
sufficiently. Do not touch the respective burner if this
indicator is lit.
Accessories
Depending on the model, the hob may include the
following accessories. These can also be acquired from
the Technical Assistance Service.
--------
Code
The manufacturer accepts no liability if these
accessories are not used or are used incorrectly.
Inner flame on low power.
Burner parts
1 Ignition plug
2 Thermocouple
3 Burner cup
4 Burner cap
k
k
k
k
k
k
k
k
k
k
k
k
k
Additional wok grid
Only suitable for use on wok
burners. Use cookware with a
rounded base.
To extend the service life of the
appliance, we recommend using
the additional wok grid.
Additional espresso maker
grid
Only suitable for use on the
smallest burner. Use cookware
with a diameter of less than
12 cm.
Z32SW11X0 Additional wok grid: Cast iron (4-5 kW)
Z32SW10X0 Additional wok grid: Cast iron (mini wok
burner)
Z32SE10X0 Additional espresso maker grid