en
18
Intensive drying
The final rinse uses a higher temperature
which improves the drying result. The
running time may increase slightly.
(Caution if utensils are delicate!)
–
Open the door.
–
Switch on ON/OFF switch
(
.
–
Hold down programme button
#
and
press START button
)"
until
•
:
‹
.... is
indicated on the digital display.
–
Release both buttons.
The LED for button
#
flashes and the
digital display
8
displays the factory
setting
•
:
‹…
.
–
Press programme button
#
until the
factory set value
š
:
‹‹
is indicated on
the digital display
8
.
To change the setting,
–
Press the button
3
to switch the
Intensive drying on
š
:
‹‚
or off
š
:
‹‹
.
–
Press START button
)"
.
The set value is saved.
–
Close the door.
Interior light *
The interior light
1"
comes on when the
door is opened irrespective of whether the
ON/OFF switch
(
is switched on or off.
When the door is closed or ajar, the light is
off.
–
Open the door.
–
Switch on ON/OFF switch
(
.
–
Hold down programme button
#
and
press START button
)"
until
•
:
‹
.... is
indicated on the digital display.
–
Release both buttons.
The LED for button
#
flashes and the
digital display
8
displays the factory
setting
•
:
‹…
.
–
Press programme button
#
until the
factory set value
“
:
‹‚
is indicated on
the digital display
8
.
To change the setting,
–
Press the button
3
to switch the
interior light off
“
:
‹‹
or on
“
:
‹‚
.
–
Press START button
)"
.
The set value is saved.
–
Close the door.
* depending on model
A regular inspection and maintenance of
your machine will help to prevent faults.
This saves time and prevents problems.
Overall condition of the machine
–
Check spray arm for grease and
limescale deposits.
If you find such deposits:
–
Fill detergent dispenser with detergent.
Start the appliance without utensils in
the programme with the highest rinsing
temperature.
Clean the appliance with detergents/
appliance cleaners which are particularly
suitable for use with dishwashers.
–
Regularly clean door seal with a damp
cloth.
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable
for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water and a
little washing up liquid are adequate. Do
not use sponges with a rough surface or
abrasive detergents, as these could
scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths or
wash them out thoroughly several times
before using for the first time.
ã=
Warning
Never use other chlorinated household
detergents! Health hazard!
Special salt and rinse aid
–
Check the refill indicators
H
and
P
. If required, refill salt and/or rinse
aid.
Maintenance and care