en
Basic settings
38
Basic setting
Selection
Description
Water connection Cold water
1
Hot water
Set cold water or hot water connec-
tion.
Only set the appliance to hot water if
this can be prepared with little energy
and a suitable installation is available,
e.g. solar heating system with circula-
tion line. The water temperature
should be at least 40 °C and max.
60 °C.
Eco forecast
on
off
1
Switch EcoCheck on or off.
When selecting the programme, the
average water consumption and en-
ergy consumption is briefly shown on
the display.
Emotion Light
off
On via main
switch
1
On on opening
door
Switch the interior lighting of the appli-
ance on or off.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Emotion Light 1
Level 1
Level 2
Level 3
Level 4
Level 5
1
Set the brightness of the interior light-
ing.
Only available if "Emotion Light" is
switched on.
Tip:
You can also set the brightness
of the interior lighting using the
Home Connect app.
Note:
If you have used the Home Con-
nect app to create your own colour,
you cannot select "Emotion Light 1".
Emotion Light 2
See selection on
the appliance.
Select the colour of the interior light-
ing.
Only available if "Emotion Light" is
switched on.
Tip:
You can also set the colour of the
interior lighting using the Home Con-
nect app.
Emotion Light 3
on
1
off
Switch visual signalling of faults on or
off.
If an error occurs on your appliance,
the interior lighting will flash.
Only available if "Emotion Light" is
switched on.
1
Factory setting (may vary according to model)
