Installation instructions
en
27
2.
To loosen the panel, close the appliance door
and at the same time press the fastening element
on the appliance door down and towards the panel
.
There may be noises when the panels are removed.
3.
Take hold of the panel on the side without the door
hinges using both hands and remove it.
4.
If necessary, press on the fastening elements again.
5.
Turn the adjustment screws for the fastening ele-
ments to the left or right to adjust the alignment of
the panels.
6.
Refit the panels.
7.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
19.10 Removing the appliance
WARNING ‒ Risk of injury!
Parts that are accessible during installation may have
sharp edges and may lead to cutting injuries.
▶
Wear protective gloves.
ATTENTION!
Unsuitable tools may damage the surface of the appli-
ance.
▶
Only use plastic tools.
▶
Do not use pointed or sharp tools.
1.
Disconnect the appliance from the power supply.
2.
Remove the panels.
"Removing and aligning the panels", Page 26
3.
Undo the fastening screws.
4.
Lift the appliance slightly and pull it out completely.
