NEFF N13TD20N0, Instruction Manual

Page: 10 / 16

en
Cleaning
10
Changing the basic settings
The hob must be switched off.
1.
Switch on the hob.
2.
Within the next 10 seconds, touch the
z
symbol for
4 seconds.
™
and
‚
flash alternately in the left-hand display;
‹
lights up in the right-hand display.
3.
Touch the
z
symbol repeatedly until the desired
indicator appears.
4.
Use the
+
or the
-
symbol to set the desired value.
5.
Touch the
z
symbol for 4 seconds.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the
main switch and make new settings.
D
Cleaning
Cleaning
Suitable maintenance and cleaning products can be
purchased from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills
from burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for glass
ceramic. Follow the cleaning instructions on the
packaging.
Never use:
■
Undiluted washing-up liquid
■
Detergent intended for dishwashers
■
Scouring agents
■
Harsh cleaning agents such as oven spray or stain
remover
■
Abrasive sponges
■
High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass
scraper, available from retailers. Please note the
manufacturer's instructions.
You can also obtain a suitable glass scraper from our
after-sales service or from the e-Shop.
Using special sponges to clean glass ceramic achieves
great cleaning results.
Hob surround
To prevent damage to the hob surround, observe the
following instructions:
■
Use only hot soapy water.
■
Wash new sponge cloths thoroughly before use.
■
Do not use any sharp or abrasive agents.
■
Do not use the glass scraper.
™†
Automatic timer
‹‹
Switched off.*
‹‚ - ŠŠ
Cooking time, after which the hotplates switch off.
™‡
Duration of the timer end signal
‚
10 seconds.
ƒ
30 seconds
„
1 minute.*
™ˆ
Activation of the heating elements
‹
Switched off.*
‚
Switched on.
ƒ
Last setting before the hotplate was switched off.
™Š
Time for selecting the hotplate
‹
Unlimited: The last selected hotplate can always be
adjusted without having to select it again.
‚
Once you select a hotplate, you have 10 seconds to adjust
it, after which you will have to select it again in order to be
able to adjust it.*
™‹
Reset the basic settings
‹
Switched off.*
‚
Switched on.
Display
screen
Function
*Basic setting
Í
|
Í
|