11
Your new appliance
Page 2 shows an overall view of your new appliance as well as
the burner power.
Accessories
The following accessories can be purchased from the
Technical Assistance Service:
Code
The manufacturer accepts no liability if these accessories are
not used or are used incorrectly.
Possible combinations
Gas burners
There are indications to show which burner each control knob
operates.
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to work
correctly. Do not swap the burner caps around.
Switching on a burner
Turn the desired burner control knob anticlockwise to the
required position.
If the burner does not switch on, wait at least a minute until
trying again.
Safety system
All the hotplates have a security device (thermocouple).
If the burner is switched off during operation (e.g. due to a
draught), the appliance automatically switches on the hotplate
again.
If relighting is not successful (for example, due to food remains
on the burner), the gas supply to this burner is turned off and a
warning sound is given. Turn the control knob to 0.
Switching off a burner
Turn the corresponding control knob clockwise to the 0 setting.
Automatic off
After six hours of operation, the appliance switches off
automatically. Turn all control knobs to setting 0; the appliance
can now be switched on again.
Additional wok pan support
Only for use on wok burners
with pans with a round base.
Using these pans may cause
some temporary deformation
of the grease drip tray. This is
normal and does not affect
the operation of the appli-
ance.
Simmer Plate
This accessory has been
designed to reduce the level
of heat at the lowest power
setting.
Place the accessory directly
on the pan support with the
cones facing upwards, never
directly over the burner. Cen-
tre the pan over the acces-
sory.
Z2470X0
Additional wok pan support
Z2480X0
Simmer Plate
Hob
Oven
M3126N1
M3146N1
E34K22N0
E35K22N0
E35K74N0
E34K22N3
E35K42N3
LJQLWLRQVSDUNHU
WKHUPRFRXSOH
