NEFF I25CBS8W0 Series, User Manual And Assembly Instructions

Page: 13 / 24

Troubleshooting
en
13
2.
Remove the empty batteries.
3.
Insert the new batteries (3 V CR 2032).
4.
Close the cover.
5.
Dispose of the empty batteries in an environmentally
friendly manner.
Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
Malfunctions
Fault Cause troubleshooting
The appliance is not working. The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power sup-
ply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen
or other appliances are working.
The lighting does not work. Different causes are possible.
▶
Call the after-sales service.
→
"Customer Service", Page 14
▶
Defective LED lights may be replaced by
the manufacturer, their customer service
or a qualified technician (electrician) only.
Remote control not working. The batteries are flat.
▶
→ "Replacing the batteries in the remote
control", Page 12
In the LED display, the LEDs
flash one to five times after the
appliance is switched off. The batteries are almost empty.
▶
→ "Replacing the batteries in the remote
control", Page 12
The lighting automatically
switches on as soon as the appli-
ance is connected to the power
supply. Demo mode is switched on.
▶
Press and hold ⁠ and ⁠ for approx. three
seconds.