7
Pausing
Press the "stop" button once, or open the appliance door. After
closing the door, press the "start" button again.
Cancelling
Press the "stop" button twice, or open the door and press the
"stop" button once.
Note:
You can also adjust the cooking time first and then the
microwave power setting.
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving memory settings
Example: 360 W, 25 minutes
1.
Press the
i
button.
"M" appears in the display.
2.
Press the required microwave power setting.
"M", the selected power setting and "1:00 min" appear in the
display.
3.
Set the cooking time using the rotary selector.
4.
Press the
i
button to confirm.
The clock reappears. The setting is saved.
Note:
You can save the memory settings and start the
appliance immediately. When finishing, instead of pressing
the
i
button, press the "start" button.
Adding to the memory
Press the "
i
" button.
The old settings appear. Save the new programme as
described in points 1 to 4.
Notes
■
You cannot save several microwave power settings one after
the other.
■
You cannot save automatic programmes.
Starting the memory
It is very easy to start the saved programme. Place your meal
into the appliance. Close the appliance door.
1.
Press the
i
button.
The saved settings are displayed.
2.
Press the "start" button.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press "stop". The
clock reappears.
Pausing
Press the "stop" button once, or open the appliance door. After
closing the door, press the "start" button again.
Cancelling
Press the "stop" button twice, or open the door and press the
"stop" button once.
Changing the signal duration
You will hear a signal when the appliance is switched off. You
can change the duration of the acoustic signal.
Press the "start" button for approx. 6 seconds.
The new signal duration is adopted.
The clock reappears.
The following are possible:
Short signal duration - 3 tones
Long signal duration - 30 tones.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
:
Risk of short circuit!
Never use high-pressure cleaners or steam cleaners to clean
the oven.
:
Risk of burns!
Never clean the appliance immediately after switching off. Let
the appliance cool down.
:
Risk of electric shock!
Do not immerse the appliance in water or clean under a jet of
water.
Surfaces are different, and damage caused by using the wrong
cleaning agent can be avoided by observing the information in
the table below.
Do not use
■
sharp or abrasive cleaning agents.
The surface could be damaged. If such a substance comes
VWRS
VWDUW
L
J
PLQ
NJ
