en
Basic operation
14
1.
Fill the ice cube tray with drinking
water up to ¾ and place in the
freezer compartment.
If the ice cube tray is stuck to the
freezer compartment, loosen it with
a blunt implement such as the
handle of a wooden spoon.
2.
To loosen the ice cubes, twist the
ice cube tray slightly or hold it
briefly under flowing water.
Ba s ic ope r a tion
7 Basic operation
Ba s ic ope r a tion
7.1 Switching on the appli-
ance
1.
Press
3 sec.
.
Note:
If the appliance has been
previously switched off using the
control panel, press and hold
3 sec.
for three seconds.
a
The temperature display shows an
animation and the control panel is
locked.
a
The appliance is ready to use once
the animation has ended and an
LED lights up for the temperature
display.
a
The appliance begins to cool.
a
A warning signal sounds and the
temperature display flashes be-
cause the freezer compartment is
still too warm.
2.
Switch off the warning tone using
.
a
The temperature lights up as soon
as the set temperature is reached.
3.
7.2 Operating tips
¡
Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡
When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
¡
The temperature in the appliance
varies due to the following condi-
tions:
– How often the appliance is
opened
– Load capacity
– Temperature of newly stored
food
– Ambient temperature
– Direct sunlight
7.3 Switching off the appli-
ance
▶
Press
3 sec.
.
7.4 Setting the temperature
Setting the freezer compartment
temperature
▶
Press repeatedly until the tem-
perature display shows the re-
quired temperature setting.
The recommended temperature in
the freezer compartment is
−18 °C.
