en
Familiarising yourself with your appliance
6
Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Control elements
You can use the controls to configure all functions of
your appliance and to obtain information about the op-
erating status.
Switching the appliance on or off
Switching on fan setting 1
Switching on fan setting 2
Switching on fan setting 3
Switching intensive mode on or off
Switching the lighting on or off
Before using for the first time
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Note:
When using it in circulating-air mode, you require
additional accessories.
▶
When using it in circulating-air mode, set the operat-
ing mode.
Basic operation
7 Basic operation
7.1 Switching on the appliance
▶
Press .
a
The appliance starts at fan setting 2.
7.2 Switching off the appliance
▶
Press .
7.3 Selecting a fan setting
▶
Press , or .
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
▶
Press .
a
After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
▶
Press , or .
7.6 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
▶
Press .
Cleaning and servicing
8 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
8.1 Cleaning the appliance
Clean the appliance as specified. This will ensure that
the different parts and surfaces of the appliance are
not damaged by incorrect cleaning or unsuitable clean-
ing products.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents
in conjunction with aluminium parts in the interior of the
appliance may cause explosions.
▶
Never use highly caustic alkaline or highly acidic
cleaning agents. In particular, do not use commer-
cial or industrial cleaning agents in conjunction with
aluminium parts, e.g. grease filter on extractor
hoods.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Before cleaning, pull out the mains plug or switch
off the fuse in the fuse box.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
▶
Allow the appliance to cool down before cleaning.
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
▶
Carefully clean the appliance interior.
1.
Observe the information regarding the cleaning
agents.
→
