6
Operating modes
This appliance can be used in exhaust-air mode or circulating-
air mode.
Exhaust air mode
Note:
The exhaust air must not be conveyed into a functioning
smoke or exhaust gas flue or into a shaft which is used to
ventilate installation rooms which contain heating appliances.
■
Before conveying the exhaust air into a non-functioning
smoke or exhaust gas flue, obtain the consent of the heating
engineer responsible.
■
If the exhaust air is conveyed through the outer wall, a
telescopic wall box should be used.
Circulating-air mode
Note:
To bind odours in circulating-air mode, you must install
an activated carbon filter. The different options for operating the
appliance in circulating-air mode can be found in the brochure.
Alternatively, ask your dealer. The required accessories are
available from specialist outlets, from customer service or from
the Online Shop. The accessory numbers can be found at the
end of the instructions for use.
Getting to know the appliance
Control panel
The air which is drawn in is cleaned by the
grease filters and conveyed to the exterior by a
pipe system.
The air which is drawn in is cleaned by the
grease filters and an activated carbon filter and
conveyed back into the kitchen.
Explanation
1
Flue
2
Lighting
3
Control panel
4
Metal mesh grease filter
Explanation
1
Fan On/Off
2
Fan on, turn fan up
3
Display panel
4
Turn the fan down
5
Fan run-on time
6
Switch on lighting
Summary of Contents for D99L20N0
Page 1: ...en Instruction manual Extractor hood D99L20N0 D99L20N0GB...
Page 2: ......
Page 10: ......
Page 11: ......