background image

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

en

    Cleaning and maintenance

8

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It 

is possible that individual features are described which 

do not apply to your appliance.

:

Warning

Risk of fire!

Fatty deposits in the grease filter may catch fire. 

Regularly clean the grease filter. Never operate the 

appliance without a grease filter.

Notes

Do not use aggressive, acidic or alkaline cleaning 

products.

We recommend cleaning the grease filters every 2 

months.

When cleaning the metal grease filters, also clean 

the metal grease filter holder in the appliance using 

a damp cloth.

The metal grease filters can be cleaned in the 

dishwasher or by hand.

By hand:

Note: 

You can use a special degreaser to remove 

stubborn dirt. This can be ordered from the online shop.

Soak the metal grease filters in hot soapy water. 

Clean the filters with a brush and then rinse them 

thoroughly.

Leave the metal grease filters to drain on an 

absorbent material.

In the dishwasher:

Note: 

Slight discolouration may occur if the metal 

grease filters are cleaned in the dishwasher. This 

discolouration has no effect on the performance of the 

metal grease filters.

Use normal domestic dishwashing detergents. 

Do not clean heavily soiled metal grease filters 

together with cookware.

Place the metal grease filters in the dishwasher, 

leaving plenty of space around them. Do not trap the 

metal grease filters.

Select a temperature of no more than 50 °C.

Installing the metal mesh grease filter

:

Warning

Risk of injury!

Components inside the appliance may have sharp 

edges. Wear protective gloves.

Note: 

Clean all accessible parts of the housing.

1.

Insert the metal grease filter and lock it in place. 

When you do this, take hold of the metal grease filter 

from underneath with your other hand.

Note: 

Make sure that the metal grease filter is 

positioned correctly.

2.

If the metal grease filter has not been inserted 

correctly, open the lock and reinsert the metal 

grease filter correctly.

Summary of Contents for D95FRM1S0






















Reviews: