background image

 Customer service  

en

9

4

Customer service

Customer 

service

When calling us, please give the product number (E 

no.) and the production number (FD no.) so that we can 

provide you with the correct advice. The rating plate 

with these numbers can be found inside the appliance 

(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance 

and the telephone number of the after-sales service in 

the space below to save time should it be required.

Please be aware that a visit by an after-sales engineer 

will be charged if a problem turns out to be the result of 

operator error, even during the warranty period.
Please find the contact data of all countries in the 

enclosed customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You 

can therefore be sure that the repair is carried out by 

trained service technicians who carry original spare 

parts for your appliances.

Accessories for circulating-air mode

(not included in the delivery)

Notes

Follow the installation instructions supplied with the 

accessories.

For appliances with an additional internal filter, only 

the CleanAir recirculation module can be used.

Basic equipment: Starter set for circulating-air mode - 

narrow

Throw-away filter

Basic equipment: Starter set for circulating-air mode - 

wide

Throw-away filter

Basic equipment: CleanAir recirculation module - 

narrow

Throw-away filter

Basic equipment: CleanAir recirculation module - wide

Throw-away filter

E no.

FD no.

After-sales service

O

GB

0344 892 8989 

Calls charged at local or mobile rate.

IE

01450 2655 

0.03 € per minute at peak. Off peak 0.0088 € 

per minute.

1

2

3

4

5

6

7

8

1

Z5101X5 channel width 260 mm

2

Z5101X1 channel width 260 mm

3

Z5102X5 channel width 345 mm

4

Z5102X1 channel width 345 mm

5

Z5270X0 channel width 260 mm

6

Z5170X1 channel width 260 mm

7

Z5276X0 channel width 345 mm

8

Z5170X1 channel width 345 mm

Summary of Contents for D86ER22N0B/02

















Reviews: