background image

18

Intensive setting:

Maximum power is obtained at the 
intensive setting. It is only required for short
intervals.

Keep pressing the 

+

button until a 

ç

appears in the display.

If the intensive setting is not cancelled by
hand, the fan will automatically switch
back to step 

}

after 10 minutes.

Fan follow-on:

Press the     

button.

The fan continues to run at step 

|

for 10

minutes, and at the same time a dot 
flashes in the display. After this period
the fan switches off automatically.

Lighting:

Briefly press the 

a

button to switch the

light on and off.

The light can be switched on at any
time, even though the fan is switched off.

Adjusting the brightness:

Hold down the 

a

button until the 

desired brightness is obtained.

Switching on the light automatically, e.g.
via a timer:

Fan and light must be switched off.

Switching on:

Simultaneously

press the 

– 

and 

!

buttons.

After approx. 3 seconds the light 
switches on to acknowledge the setting.

Switching off:

Repeat the process with the light switched
on.

After approx. 3 seconds the light 
switches off to acknowledge the setting.

Light

Fan OFF

Reduce fan speed

Fan ON and
increase
speed

Display for
fan setting

Fan follow-
on

Operating procedure

Acoustic signal:

When a button is pressed, this is verified
by an acoustic signal.

Switching off the acoustic signal:

Simultaneously press buttons 

0

and 

+

until a signal is emitted after approx. 3
seconds.

Switching on the acoustic signal:

Repeat the process.

Switching the fan ON

Press the 

+ button.

Setting the required fan speed:

Press the 

+ button.

The fan speed is increased by one step.

Press the 

– button.

The fan speed is reduced by one step.

Switching the fan OFF:

Press the 

0

button.

The displayed 

{

goes out shortly 

afterwards.

Or:

Keep pressing the 

button until the fan

switches off.
The displayed 

{

goes out shortly 

afterwards.

The most effective method of removing

vapours produced during cooking is to:

Switch the ventilator ON

as soon as you begin cooking.

Switch the ventilator OFF

a few minutes after you have finished
cooking.

Summary of Contents for D7950 Series
















Reviews: