NEFF D65XAM2S0, User Manual And Installation Instructions

Page: 15 / 20

Installation instructions
en
15
7. Note:
Ensure that the front of the appliance does
not protrude over the front of the cabinet after it is
screwed in.
Tighten the threaded pins through the recess in the
rail hand-tight until the appliance is flush with the
cabinet.
8.
Insert the covers.
9.
Insert the mains plug.
10.
Remove the protective film from the grease filters.
11.
Refit the cabinet door.
12. Note:
Ensure that the safety mat does not protrude
over the front of the appliance.
Measure the flat surface and trim the safety mats to
size.
13. Insert the safety mats.
Removing the appliance
1. Unplug the mains plug.
2.
Detach the cabinet door.
3. Note:
Before removing the appliance, remove any
objects from the shelf.
Carefully remove the covers.
4.
Open the glass panel and unscrew the threaded
pins in the rail.
5.
Remove the safety mats on both sides.
6.
Push in the two locking points at the side and
carefully remove the duct ⁠.
7.
Loosen the pipework.
8.
Close the glass panel and remove the appliance
⁠.