background image

Disposal

 en

9

Fault

Cause and troubleshooting

The LED lighting
does not work.

Different causes are possible.

Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.

Call the after-sales service. 
→ 

"Customer Service", Page 9

The button illumina-
tion does not work.

The control unit is faulty.

Call the after-sales service. 
→ 

"Customer Service", Page 9

9  Disposal

Find out here how to dispose of old appliances cor-
rectly.

9.1 Disposing of old appliance

Valuable raw materials can be reused by recycling.

1.

Unplug the appliance from the mains.

2.

Cut through the power cord.

3.

Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.

This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.

10  Customer Service

If you have any queries on use, are unable to rectify
faults on the appliance yourself or if your appliance
needs to be repaired, contact Customer Service.
Function-relevant genuine spare parts according to the
corresponding Ecodesign Order can be obtained from
Customer Service for a period of at least 10 years from
the date on which your appliance was placed on the
market within the European Economic Area.

Note: 

Under the terms of the manufacturer's warranty

the use of Customer Service is free of charge.

Detailed information on the warranty period and terms
of warranty in your country is available from our after-
sales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.) and the production number
(FD) of your appliance.

The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.

10.1 Product number (E-Nr.) and
production number (FD)

You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.
Depending on the model, the rating plate can be found:

¡

Inside the appliance (remove grease filters for ac-
cess).

¡

On top of the appliance.

Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.

11  Accessories

Only use original accessories. These have been made
especially for your appliance. Here you can find an
overview of your appliance's accessories and how to
use them.

Accessories

Order number

Standard circulated air
set (flat hood)

Z51AFU0X0

Standard no-flue circu-
lated air set (flat hood)

Z51AFT0X0

Accessories

Order number

Standard odour filter (re-
placement, flat hood)

Z51AFA0X0

Standard circulated air
set (angled canopy hood)

Z51AIU0X0

Standard no-flue circu-
lated air set (angled can-
opy hood)

Z51AIT0X0

Standard odour filter (re-
placement, angled can-
opy hood)

Z51AIA0X0

Summary of Contents for D65FRM1S0

















Reviews: