NEFF D65BMP5N0B, Instructions For Installation And Use Manual

Page: 8 / 20

en
Operating the appliance
8
Lighting
The lighting can be switched on and off independently
of the fan.
Touch the
6
symbol.
Setting the brightness
Press and hold the
6
symbol until the required
brightness is reached.
Saturation display
If the metal grease filters or the activated charcoal filter
are/is saturated, the corresponding symbols flashes
after the appliance is switched off:
■
Metal grease filter: ӻ
■
Activated charcoal filter: ’ª
■
Metal grease filter and activated charcoal filter:
ӻ
and
’ª
If you have not yet done so, the metal grease filters
should now be cleaned or the activated charcoal filter
replaced.
~
"Cleaning and maintenance" on page 9
Note:
The saturation indicator does not apply for non-
renewable activated charcoal filters that are inserted
downstream of the metal grease filter. These activated
charcoal filters must be replaced twice a year.
The saturation indicators can be reset while they are
flashing. To do this, touch the
(
symbol.
Switching over the display for air circulation mode
For air recirculation mode, the electronic controller must
be switched over accordingly:
■
The extractor hood must be connected and switched
on.
■
Touch and hold the
Q
symbol and touch
the
(
or
)
symbol until "2" lights up for air
recirculation mode (filters that cannot be
regenerated). Take your finger off the
Q
symbol.
This will switch the electronic controller over to air
recirculation mode (filters that cannot be
regenerated).
■
Touch and hold the
Q
symbol and touch
the
(
or
)
symbol until "3" lights up for air
recirculation mode (filters that can be regenerated).
Take your finger off the
Q
symbol. This switches the
electronic controller over to air recirculation mode
(filters that can be regenerated).
■
Repeatedly touching and holding the
Q
symbol and
touching the
(
or
)
symbol until "1" lights up switches
the electronic controller back over to air extraction
mode.
Audible signal
Switching on
Touch and hold the
#
and
Q
symbols at the same
time for approximately 3 seconds when the fan is
switched off. An audible signal will sound as an
acknowledgement.
When the signal tone is activated,
‚
will be lit.
Switching off
Touch and hold the
#
and
Q
symbols at the same
time for approximately 3 seconds when the fan is
switched off. An audible signal will sound as an
acknowledgement.
When the signal tone is deactivated,
‹
will be lit.