NEFF D57MH56N0, Instruction Manual

Page: 8 / 12

8
Fitting the activated charcoal filter (only in
circulating-air mode)
1.
Insert the activated charcoal filter into the extractor hood.
2.
Guide the activated charcoal filter around the motor.
3.
Carefully slide the new activated charcoal filter into the
retainer.
4.
Install the metal grease filters.
Installing the metal mesh grease filter
1.
Insert the metal mesh grease filter.
While doing this, place the other hand under the metal mesh
grease filter.
2.
Fold the metal mesh grease filter upwards, locking it in place.
Removing the activated charcoal filter (only in
circulating-air mode)
In order to ensure adequate odour removal, you must replace
the activated charcoal filter regularly.
With normal levels of use (1 to 2 hours a day), the activated
charcoal filter must be replaced at least every 12 months.
Notes
■
The activated charcoal filter is not included with the
appliance.The activated charcoal filter is available from
specialist retailers, from our after-sales service or from our
online shop.
■
The activated charcoal filter cannot be cleaned or reactivated.
■
Activated charcoal filters do not contain any harmful
substances and can be disposed of with your normal
household waste.
1.
Remove the magnetic panel.
2.
Take out the activated charcoal filter.
Fitting the activated charcoal filter (only in
circulating-air mode)
1.
Take the new activated charcoal filter out of its packaging
and insert it in the air recirculation module.
2.
Fit the panel such that it is held firmly in place by the
magnets.