en
Installation instructions
14
3.
Undo the hinge lock and remove the filter cover.
4.
Remove the grease filters.
To avoid causing damage, do not bend the grease
filters.
5.
Undo the control panel cabling and cabling for the
lighting.
6.
Undo the screws in the frame and remove the
frame .
Preparing circulating-air mode
1.
Position the filter retainer correctly on the motor
and turn it to the front until it clicks into place .
2.
Slide the odour filter into the filter retainer.
Installing the appliance
1.
Insert the appliance into the opening in the fitted
unit and screw it to the fitted unit .
2.
Tighten the fastening screws.
3.
Attach the frame and screw it to the appliance from
below.
4.
Secure the frame and the appliance with screws.
If the screws are not accessible from the exterior,
the screws can also be fitted from the interior.
