background image

Installation instructions

 en

11

Unrestricted operation is possible if the ap-
pliance is operated exclusively in air recir-
culation mode.

WARNING ‒ Risk of suffocation!

Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.

Keep packaging material away from chil-
dren.

Do not let children play with packaging ma-
terial.

WARNING ‒ Risk of fire!

Grease deposits in the grease filter may catch
fire.

The specified safety clearances must be
complied with in order to prevent a build-up
of heat.

Observe the specifications for your cooking
appliance. If gas and electric hobs are be-
ing operated together, the largest specified
clearance applies.

The appliance must be installed with no
more than one side directly next to a high-
sided unit or a wall. The distance between
the appliance and wall or high-sided unit
must be at least 50 mm.

Grease deposits in the grease filter may catch
fire.

Never work with naked flames close to the
appliance (e.g. flambéing).

Do not install the appliance near a heat-
producing appliance for solid fuel (e.g.
wood or coal) unless a closed, non-remov-
able cover is available. There must be no
flying sparks.

WARNING ‒ Risk of injury!

Components inside the appliance may have
sharp edges.

Wear protective gloves.

The appliance may fall down if it has not been
properly fastened in place.

All fastening components must be fixed
firmly and securely in place.

The appliance is heavy.

To move the appliance, two people are re-
quired.

Use only suitable tools and equipment.

Changes to the electrical or mechanical as-
sembly are dangerous and may lead to mal-
functions.

Do not make any changes to the electrical
or mechanical assembly.

WARNING ‒ Risk of electric shock!

Sharp-edged components inside the appli-
ance may damage the connecting cable.

Do not kink or trap the connecting cable.

If the appliance or the power cord is dam-
aged, this is dangerous.

Never operate a damaged appliance.

Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.

If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.

Call Customer Service. 

→ 

Page 9

Repairs to the appliance should only be
carried out by trained specialist staff.

Incorrect repairs are dangerous.

Repairs to the appliance should only be
carried out by trained specialist staff.

Only use genuine spare parts when repair-
ing the appliance.

If the power cord of this appliance is dam-
aged, it must be replaced by the manufac-
turer, the manufacturer's Customer Service
or a similarly qualified person in order to
prevent any risk.

Improper installation is dangerous.

Connect and operate the appliance only in
accordance with the specifications on the
rating plate.

Connect the appliance to a power supply
with alternating current only via a properly
installed socket with earthing.

The protective conductor system of the do-
mestic electrical installation must be prop-
erly installed.

Never equip the appliance with an external
switching device, e.g. a timer or remote
control.

When the appliance is installed, the mains
plug of the power cord must be freely ac-
cessible. If free access is not possible, an
all-pole isolating switch must be installed in
the permanent electrical installation accord-
ing to the conditions of Overvoltage Cat-
egory III and according to the installation
regulations.

When installing the appliance, check that
the power cable is not trapped or dam-
aged.

Summary of Contents for D46BR12X6

















Reviews: