12
Replacing the cooking compartment bulb
You can replace the cooking compartment bulb. Heat-resistant
25 watt, 240 V halogen bulbs can be obtained from the after-
sales service or from a specialist retailer.
:
Risk of electric shock!
Never replace the oven light when the appliance is switched on.
Pull out the mains plug or switch off the appliance at the circuit
breaker in the fuse box.
Note:
Always remove the new halogen bulb from the packaging
using a dry cloth. This increases the service life of the bulb.
Method
Note:
You must remove the whole appliance in order to replace
the cooking compartment light. Follow the installation
instructions.
1.
Unplug the appliance from the mains or switch off the circuit
breaker in the fuse box.
2.
Open the appliance door.
Undo the securing screws on the right and left-hand side of
the oven. Follow the installation instructions.
3.
Carefully lift out the appliance.
4.
Undo the screw from the light cover on the outer left-hand
side wall and remove the cover. (Fig. A) Pull out the halogen
light. (Fig. B).
5.
Insert the new halogen bulb (Fig. C)
6.
Screw the lamp cover in place.
Reassemble the appliance in the reverse order.
7.
Switch the circuit breaker in the fuse box back on or plug in
the mains plug.
Replacing the glass cover
If the glass cover in the oven is damaged, it must be replaced.
You can obtain covers from the after-sales service. Please
supply your appliance's E number and FD number.
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate bearing these numbers can
be found in the oven. You can make a note of the number of
your appliance and the telephone number of the after-sales
service in the space below to save time should it be required.
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
This appliance corresponds to the standards EN 55011 and
CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the purpose
of heating food. Class B states that the appliance is suitable for
private households.
Technical data
%
$
&
E no.
FD no.
After-sales service
O
GB
0844 8928989
Calls from a BT landline will be charged at up to
3 pence per minute. A call set-up fee of up to 6 pence
may apply.
IE
01450 2655
0.03 € per minute at peak. Off peak 0.0088 € per
minute.
Power supply
220-240 V, 50 Hz
Maximum total connected load 1180 W
Microwave power setting
1000 W (IEC 60705)
Microwave frequency
2450 MHz
Fuse
min. 10 A
Summary of Contents for C57W40N3GB
Page 1: ...en Instruction manual C57W40N3GB C57W40S3GB Microwave...
Page 19: ......
