29
Error messages
You can take remedial action yourself for some error
messages.
Replacing the cooking compartment bulb
You can replace the cooking compartment bulb. Heat-resistant
25 watt, 240 V halogen bulbs can be obtained from the after-
sales service or from a specialist retailer.
:
Risk of electric shock!
Never replace the oven light when the appliance is switched on.
Pull out the mains plug or switch off the appliance at the circuit
breaker in the fuse box.
Note:
Always remove the new halogen bulb from the packaging
using a dry cloth. This increases the service life of the bulb.
Method
Note:
You must remove the whole appliance in order to replace
the cooking compartment light. Follow the installation
instructions.
1.
Unplug the appliance from the mains or switch off the circuit
breaker in the fuse box.
2.
Open the appliance door.
Undo the securing screws on the right and left-hand side of
the oven. Follow the installation instructions.
3.
Carefully lift out the appliance.
4.
Undo the screw from the light cover on the outer left-hand
side wall and remove the cover. (Fig. A) Pull out the halogen
light. (Fig. B).
5.
Insert the new halogen bulb (Fig. C)
6.
Screw the lamp cover in place.
Reassemble the appliance in the reverse order.
7.
Switch the circuit breaker in the fuse box back on or plug in
the mains plug.
Replacing the glass cover
If the glass cover in the oven is damaged, it must be replaced.
You can obtain covers from the after-sales service. Please
supply your appliance's E number and FD number.
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate bearing these numbers can
be found in the oven. You can make a note of the number of
your appliance and the telephone number of the after-sales
service in the space below to save time should it be required.
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
Error message
Possible cause
Remedy/Note
Error message "Er1", "Er4", "Er18" or "E305"
appears in the display.
Technical malfunction.
Call the after
а
sales service.
Error message "Er11" appears in the dis-
play. "Button jammed"
The buttons are dirty or the mechanism
has jammed.
Press all the buttons several times. Clean
the buttons with a dry cloth. Open and
close the appliance door. If this does not
help, consult the after-sales service.
%
$
&
E no.
FD no.
After-sales service
O
Summary of Contents for C57W40N3
