NEFF C54L70N3GB, Instruction Manual

Page: 7 / 20

7
Ovenware test
Do not switch on the microwave unless there is food inside. The
following ovenware test is the only exception to this rule.
Perform the following test if you are unsure whether your
ovenware is suitable for use in the microwave:
1.
Heat the empty ovenware at maximum power for ½ to
1 minute.
2.
Check the temperature occasionally during that time.
The ovenware should still be cold or warm to the touch.
The ovenware is unsuitable if it becomes hot or sparks are
generated.
Microwave power settings
Use the button to set the desired microwave power.
Notes
■
When you press a button, the selected power lights up.
■
The microwave power can be set to 900 watts for a
maximum of 30 minutes. With all other power settings a
maximum cooking time of 1 hour 30 minutes is possible.
Setting the microwave
Example: microwave power 600 W, cooking time 10 minutes
1.
Press the main switch.
The appliance is ready for operation and the
~ symbol lights
up.
2.
Press the button for the microwave power setting you require.
The selected power setting lights up and a suggested
cooking time is displayed.
3.
Set the cooking time using the rotary selector.
4.
Press the … button.
Operation begins. The cooking time starts counting down in the
display.
The cooking time has elapsed.
A signal sounds. The microwave operation has finished. You
can stop the audible signal by pressing the
ÁÀ
button. Switch
off with the main switch or make new settings.
Changing the cooking time
Change the cooking time using the rotary selector.
Changing the microwave power setting
Press the button for the new microwave power setting. Use the
rotary selector to set the cooking time and restart.
Cancelling operation
Press and hold the
…
button for a few seconds and switch off
the main switch.
Note:
If you open the appliance door during cooking, the fan
may continue running.
1, 2, 3 series of operations
You can use the series of operations function to set up to three
different consecutive settings and then start.
In this section, you can find out how to set a series of
operations.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Prerequisite: switch on the main switch. Your appliance is ready
for operation and the ~ symbol lights up
1.
Press the
°±²
button.
The ° for the first operation in the series lights up.
2.
Set the first microwave power setting and cooking time.
3.
Press the °±² button again.
The ± for the second operation in the series lights up.
4.
Set the second microwave power setting and cooking time.
5.
Press the °±² button again.
The ² lights up for the third operation in the series.
6.
Set the third microwave power setting and cooking time.
7.
Press the … button.
Operation begins. In the clock display, the total cooking time is
displayed and the currently activated operation is lit.
The cooking time has elapsed
A signal sounds. The series of operations has finished. To stop
the signal, press the
ON
clock function button. Switch off the
appliance or make new settings.
Opening the appliance door during operation
Operation is suspended. The cooling fan may continue to run.
After closing the door, press the … button. Operation
continues.
Changing the setting
Changes can only be made before operation begins. Press
the °±² button to go to the desired setting, and make the
changes.
Cancelling operation
Press the illuminated button for the set microwave power
setting. Make new settings or switch off the appliance.
Pausing operation
Press the … button to pause the operation. Press the … button
to continue operation.
Note:
You can also combine the grill with a series of
operations. First, set the series of operations.
90 W for defrosting delicate foods
180 W for defrosting and continued cooking
360 W for cooking meat and heating delicate foods
600 W for heating and cooking food
900 watts for heating liquids