NEFF B56VT64 0 Series, Instruction Manual

Page: 16 / 64

en
Operating the appliance
16
5.
Touch the
#
touch button to start the appliance
operation.
The heat-up indicator bar and the run time appear in
the display.
Note:
If you want to go directly to the
0
main menu
when you switch on the appliance, you can find
instructions on how to do this in the Basic settings
chapter under "Operation after switching on".
Default values
The appliance suggests a temperature or setting for
each type of heating. You can accept this value or
change it in the appropriate area.
Heating bar
As soon as a type of heating has started, the heating
bar appears on the display.The heating bar shows the
temperature increase in the cooking compartment.
Run time
When a type of heating has been started, the run time is
displayed. The run time counts upwards during the
operation. You can therefore check how long the
operation has already been running.
Displaying the current temperature
To show the current temperature on the display, press
the
!
touch button.
The current temperature is shown briefly only when
heating up.
Further information
If the
!
touch button lights up, information can be
displayed. Touch the
!
touch button to do this. The
information is displayed for a few seconds.
Changing or cancelling the appliance
operation
Changing the appliance operation
1.
Use the
#
button to stop the operation.
2.
Tap the line for the setting that should be changed.
3.
Swipe to the left or right to change the setting.
4.
Use the
#
touch button to start the changed
operation.
Notes
■
The cooling fan may continue to run while an
operation is interrupted.
■
After a temperature change, the paused running time
continues to count. After a change in the type of
heating, the running time starts again from zero.
Cancelling the appliance operation
Press and hold the
#
touch button until the appliance
operation is cancelled.
Note:
Operating modes such as the cleaning function
cannot be cancelled.
Heating up the appliance quickly
You can use the "Rapid heat-up" and "PowerBoost"
functions to reduce the preheat time. Whether the
appliance is preheated with the "Rapid heat-up" function
or the "PowerBoost" function depends on the type of
heating that has been set. With the "PowerBoost"
function, unlike with the "Rapid heat-up" function, you
can place your food into the cold cooking compartment
even before preheating has begun. Only cook on one
level when using the "PowerBoost" function.
Notes
■
If the
°
touch button is lit, the "Rapid heat-up" or
"PowerBoost" function can be activated.
■
To deactivate the "Rapid heat-up" or "PowerBoost"
function before it has finished, touch the
°
touch
button.
Activating the "Rapid heat-up" function
1.
Set top/bottom heating
ƒ
and the temperature.
Note:
Set a temperature above 100 °C to allow the
appliance to preheat quickly.
2.
Touch the
#
touch button to start the appliance
operation.
3.
Touch the
°
touch button to activate the "Rapid
heat-up" function.
The
°
symbol appears on the display.
4.
Once the set temperature has been reached, the
"Rapid heat-up" function switches itself off
automatically. The
°
symbol disappears from the
display. Place the food in the cooking compartment
Activating the "PowerBoost" function
1.
Set CircoTherm hot air
‚
or the bread baking
setting
…
and the temperature.
Note:
Set a temperature above 100 °C to allow the
appliance to preheat quickly.
2.
Place the food on a single level in the cooking
compartment.
3.
Touch the
#
touch button to start the appliance
operation.
4.
Touch the
°
touch button to activate the
"PowerBoost" function.
The
°
symbol appears on the display.
Once the set temperature has been reached, the
"PowerBoost" function switches itself off
automatically. The
°
symbol disappears from the
display.
Function Type of heating Place the food in
the cooking
compartment
Rapid heat-up Top/bottom heating
ƒ
after preheating
PowerBoost* CircoTherm hot air
‚
before preheating
Bread-baking setting
…
* Do not use more than one level for cooking