NEFF B47VR32.0B, User Manual And Installation Instructions

Page: 22 / 44

en
Cleaning functions
22
15.4 Cleaning self-cleaning surfaces in the
cooking compartment
The back panel, ceiling and side walls in the cooking
compartment are self-cleaning and have a coarse sur-
face.
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
▶
If dark stains are visible on the self-cleaning sur-
faces, use the cleaning function to clean the cook-
ing compartment.
▶
If a prompt to clean appears in the display, use the
cleaning function to clean the cooking compart-
ment.
▶
Do not use oven cleaner or abrasive cleaning aids.
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
▶
Use the cleaning function.
→
"EcoClean cleaning function", Page 22
16 Cleaning functions
You can use the cleaning functions to clean the appli-
ance.
16.1 EcoClean cleaning function
Use the "EcoClean" cleaning function regularly to help
retain the cleaning ability of the self-cleaning surfaces
and prevent damage.
The self-cleaning surfaces in the cooking compartment
are coated with a porous, matt ceramic layer and have
a rough surface. When the appliance is in operation,
the self-cleaning surfaces absorb splashes from roast-
ing or grilling and break them down.
The following surfaces are self-cleaning:
¡
Back wall
¡
Ceiling
¡
Side walls
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
▶
If dark stains are visible on the self-cleaning sur-
faces, use the cleaning function to clean the cook-
ing compartment.
▶
If a prompt to clean appears in the display, use the
cleaning function to clean the cooking compart-
ment.
▶
Do not use oven cleaner or abrasive cleaning aids.
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
Cleaning recommendation
The appliance records the type and duration of the op-
eration and, if required, recommends which cleaning
function to use.
When you switch on the appliance, a notification ap-
pears in the display stating that you should use the
cleaning function. Start the cleaning function as soon
as possible.
You can use your appliance as normal. However, the
cleaning setting appears in the display until you have
run the cleaning function in full.
Note:
If the appliance is prematurely contaminated, e.g.
by greasy poultry or roasts, or if dark spots appear on
the self-cleaning surfaces, do not wait until the notifica-
tion appears in the display before you use the cleaning
functions. The more often you use the cleaning func-
tion, the longer the cleaning ability of the self-cleaning
surfaces is retained.
Preparing the appliance for the cleaning
function
In order to achieve a good cleaning result, prepare the
appliance carefully.
ATTENTION!
Using oven cleaner on the self-cleaning surfaces dam-
ages the surfaces.
▶
Do not use oven cleaner on the self-cleaning sur-
faces. If oven cleaner does get onto these surfaces,
dab it off immediately using water and a sponge
cloth. Do not rub the surface and do not use abras-
ive cleaning aids.
1.
Remove accessories and cookware from the cook-
ing compartment.
2.
Detach the shelf supports and remove them from
the cooking compartment.
→
"Rails", Page 24
3.
Remove coarse dirt using soapy water and a soft
cloth:
– From the cooking compartment floor
– From the inside of the appliance door
– From the glass cover on the oven light
This prevents stains that cannot be removed.
4.
Remove any objects from the cooking compartment.
The cooking compartment must be empty.
Configuring the EcoClean cleaning function
WARNING ‒ Risk of burns!
The outside of the appliance gets very hot when the
cleaning function is in progress.
▶
Never touch the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
Requirements
¡
Prepare the appliance for the cleaning function.
→
Page 22
¡
Do not open the appliance door while the appliance
is in operation, as this will abort the cleaning func-
tion.
1. Press to switch the appliance on.
2.
Press ⁠.
3. Use the or button to set "EcoClean" ⁠.
4.
Use the button to navigate to the next row.
a The duration of the cleaning function will appear on
the display.
5. Use the button to navigate to the next row.