NEFF B47VR32.0B, User Manual And Installation Instructions

Page: 11 / 44

Basic operation
en
11
Setting Water hardness in
mmol/l German hardness in
°dH French hardness °fH
3 (hard) 2.5-3.8 14-21.3 25-38
4 (very hard)
2
Above 3.8 Above 21.3 Above 38
1
Only set this if you will be using solely softened water.
2
Also set for mineral water. Only use non-carbonated mineral water.
6.2 Initial use
When the appliance is connected to the power supply
for the first time or following a lengthy power failure, the
settings that you will need to configure before you can
use it will appear.
Note:
You can change these settings at any time by
going to the basic settings.
→
"Basic settings", Page 19
Setting the language
1.
Connect the appliance to the power supply.
a The first setting will appear after a few seconds.
2.
Use the button to navigate to the bottom row.
3. Use the or button to select the language.
4.
Use the button to navigate back to the top row.
5. Use the button to select the next setting.
Setting the time
1.
Use the button to navigate to the next row.
2.
Use the or button to select the current time.
3.
Use the button to navigate back to the top row.
4.
Use the button to select the next setting.
Setting the date
1. Use the button to navigate to the next row.
2.
Use the or button to select the correct day.
3. Use the button to navigate back to the top row.
4.
Use the button to select the next setting.
5. Use the button to navigate to the next row.
6.
Use the or button to select the correct month.
7. Use the button to navigate back to the top row.
8.
Use the button to select the next setting.
9. Use the button to navigate to the next row.
10.
Use the or button to select the correct year.
11. Use the button to navigate back to the top row.
12.
Use the button to select the next setting.
Setting the water hardness
1.
Use the button to navigate to the bottom row.
2.
Use the or button to select the water hardness
range.
→
"Before using for the first time", Page 10
3.
Use the button to navigate back to the top row.
4. Use the button to save your settings.
5.
Open and close the appliance door once.
a
The appliance will perform a self-test, after which it
will be ready to use.
a
Initial configuration is now complete.
6.3 Cleaning the appliance
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
Remove the product information, accessories and
any leftover packaging (e.g. polystyrene pellets)
from the cooking compartment.
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Press to switch the appliance on.
→
"Switching on the appliance", Page 11
4.
Fill the water tank.
→
"Filling the water tank", Page 12
5.
Set the required heating function, temperature and
steam assistance for the heat-up process and press
to start.
→
"Setting the type of heating and temperature",
Page 12
→
"Steam-assisted cooking", Page 14
Heating up
Heating function CircoTherm hot air
with steam assistance
, steam intensity "High"
Temperature Maximum
Cooking time 1 hour
6.
Keep the kitchen ventilated while the appliance is
heating.
7.
Press to switch off the appliance after 1 hour.
→
"Switching off the appliance", Page 11
8.
Allow the appliance to cool down.
9. Clean the smooth surfaces with soapy water and a
dish cloth.
10. Empty the water tank and dry the cooking compart-
ment.
→
"After every steam operation", Page 14
11.
Thoroughly clean any accessories you used with
soapy water and a dish cloth.
7 Basic operation
7.1 Switching on the appliance
▶
Press to switch the appliance on.
Notes
¡
In the basic settings, you can specify whether the
heating functions or the main menu should appear
when you switch on the appliance.
→
"Basic settings", Page 19
¡
If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
7.2 Switching off the appliance
▶
Press to switch the appliance off.