NEFF B2ACH7H.0B, User Manual And Installation Instructions

Page: 14 / 36

en
Home Connect
14
Display Basic setting Selection
Childproof lock can be adjusted = no
= yes
1
= yes, with locked door
Interior lighting during operation = no
= yes
1
Cooling fan run-on time = short
= medium
1
= long
= extra long
Telescopic shelves retrofitted
2
= no
1
(for rails and 1-level pull-out)
= yes (for 2- and 3-level pull-out)
Sabbath mode available = no
1
= yes
Reset all values to factory settings = no
1
= yes
.. Home Connect Settings
→ "Home Connect ", Page 14
1
Factory setting (may vary according to model)
2 Depending on the appliance specifications
12.2 Changing basic settings
Requirement:
The appliance is switched off.
1.
Press and hold the button for approximately
four seconds.
a
The first basic setting appears in the display,
e.g. ⁠ ⁠ ⁠ ⁠.
2.
Use the temperature selector to change the setting.
3. Use the or button to switch to the next basic set-
ting.
4.
To save the changes, press and hold the button
for approx. four seconds.
Note:
Your changes to the basic settings will be re-
tained even after a power failure.
12.3 Discarding changes to the basic
settings
▶
Turn the function selector.
a
All changes are discarded and not saved.
13 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
"Safety", Page 2
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
13.1 Setting up Home Connect
Requirements
¡
The appliance is connected to the power supply and
is switched on.
¡
You have a smartphone or tablet with a current ver-
sion of the iOS or Android operating system.
¡
The smartphone and the appliance are within range
of your home network's Wi-Fi signal.
1.
Download the Home Connect app.
2.
Open the Home Connect app and scan the follow-
ing QR code.