Time-setting options
en
13
Heating indicator
As soon as the appliance heats up, the
/
symbol
appears in the display.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
when the
/
symbol first goes out.
Note:
Due to thermal inertia, the temperature that is
displayed may be slightly different to the actual
temperature inside the cooking compartment.
Rapid heating
With Rapid heating, you can shorten the heat-up time.
Only use rapid heating when a temperature of over
100 °C has been selected.
To achieve an even cooking result, do not place your
food into the cooking compartment until rapid heating is
complete.
1.
Set the function selector to
°
.
2.
Use the temperature selector to set a temperature of
above 100 °C.
The oven starts to heat up after a few seconds. The
°
symbol appears in the display.
3.
Wait until a signal sounds and the
°
symbol goes
out.
The rapid heating has ended.
4.
Place the meal in the cooking compartment.
5.
Set the type of heating.
O
Time-setting options
Time-setting options
Your appliance has different time-setting options.
An audible signal sounds once the cooking time or
timer duration has elapsed. You can cancel the audible
signal early by pressing the
0
button.
Note:
You can change how long the audible signal
sounds for in the basic settings.
Note:
If you have set a time-setting option, the time
interval increases if you set a higher value. Example:
You can set a cooking time of up to one hour in one-
minute increments; for cooking times over one hour,
you can set a cooking time in five-minute increments.
Setting the timer
The timer can be set when the appliance is switched on
or off. It has its own audible signal so that you can tell
whether it is the timer duration or a cooking time that
has elapsed.
Tip:
If the set timer duration is the duration for which
you want to cook your food, use the cooking time. The
appliance then switches off automatically.
1.
Press the
0
button repeatedly until the
Q
symbol is
selected.
2.
Use the
(
and
)
buttons to set the timer duration.
– Default value for the
(
button = 5 minutes
– Default value for the
)
button = 10 minutes
The setting is applied
automatically. The timer duration starts to count
down after a few seconds.
Note:
When the set time has elapsed, a signal sounds.
To end the timer, press the
0
button.
Time-setting option Use
Q
Timer
The timer functions like an egg timer. It runs
independently of the appliance when it is
heating and of other time-setting options, and
does not affect the appliance.
x
Cooking time
Once the set cooking time has elapsed, the
appliance automatically stops heating.
y
End time
Enter a cooking time and the required end
time. The appliance starts up automatically so
that it finishes cooking at the required time.
0
Time
Set the time, e.g. after a power cut, or change
it, e.g. from summer time to winter time.
