1
6
/
OperatingModelingLamp
Use radio transmitter to remotely control the brightness of
modeling lamp, dimmable in six steps.
Shortly press [MODEL/AF] button, to set up modeling lamp
of group A, B, and C in sequence.
1.SetmodelinglampofgroupA:
short press [MODEL/AF]
button, the LCD screen only show modeling lamp value of group
A. Rotate dial and set up proper modeling lamp output 1/2/3/4/
5/6/OFF. Press [OK] button to save setting.
2
.
SetmodelinglampofgroupB:
short press [MODEL/AF]
button twice, the LCD screen only show modeling lamp value of
group B. Rotate dial and set up proper modeling lamp output 1/
2/3/4/5/6/OFF. Press [OK] button to save setting.
3.SetmodelinglampofgroupC:
short press [MODEL/AF]
button, the LCD screen only show modeling lamp value of group
C. Rotate dial and set up proper modeling lamp output 1/2/3/4/5/
6/OFF. Press [OK] button to save setting.
Caution: The feature that remotely control modeling lamp is only
applicable to a few series of
VISION
flashes. It is not applicable
to other brand of flashes.
1
7
/
Test
Press [TEST] button, radio transmission confirmation lamp light
in red, can test whether flash is triggered normally.