This product is a 2.4G remote control with a display screen, with a 1.3-inch LCD display screen and a backlight, which is
convenient for users to use at night. This product can match most types of photographic fill light produced by our
company.
3. Operation
1. Install the battery
Push the battery back cover in the direction of the arrow marked on the back cover, and after hearing a "click", remove
the battery back cover. Assemble two 1.5V AAA batteries correctly according to the + and-signs in the battery
compartment. Then install the back shell.
2. The remote control turns on and off
When the remote control is properly installed with batteries, press and hold the ON/OFF button for 3 seconds to turn
on the remote control. In the power-on state, press and hold the ON/OFF button for 3 seconds to turn off the remote
control.
3. Channel and group settings
After the remote control is turned on, press the CH/GRP button, and the letter representing the group on the display
will flash. Press the + and-buttons to switch between the groups: A, B, C, and ABC. Press the CH/GRP button again, the
value behind CH on the display will flash, press the + and-buttons to set the channel value of the remote control.
4. Brightness and color temperature adjustment
After the remote control is turned on, the + and-buttons default to brightness addition and subtraction. Short
pressing the + and-buttons will increase or decrease the brightness by 1%. Long press the + and-keys, the brightness
will increase or decrease continuously in 5% steps.
Press the SET button and the color temperature value on the display will flash. Short press the + and-keys to increase
or decrease the color temperature by 100K. Long press the + and-keys, the color temperature will continue to increase
or decrease in steps of
200K.
4．
Product Size
Unit: mm Tolerance:
±
1.0mm L=138 W=38 H=16
