Doc#: 313-0001-002 REV 0
6 of 11
Static IP address
To configure the Touch Panel with static IP:
1.
In "Control system IP address" -> Enter the IP address of the control system
2.
In "Ethernet settings" -> "Ethernet" -> "Advanced configure" ->
o
Uncheck DHCP
o
Enter the static IP address (must be in the same range as the control system)
o
Enter Mask address, DNS and gateway in accordance with the network
configuration
o
Press OK
3.
Jump back to the application settings menu by pressing "back" button twice
4.
Choose "Connect to the control system"
Now, the project GUI from the control system will load and you can take control.
