Page 15 of 28
Each unit can be assigned an ID number (Default 1) that allows you to define which unit should
respond to a given command.
I/O Connection
Using the amplifier or preamplifier as a RS-232 or LAN to IO
gateway
External equipment can be controlled through the unit’s IOs
by either RS-232 or LAN. For example, a Neets Switching
Relay – 2 can be controlled when connected as shown here.
Powering external control systems from the preamplifier
When powering the preamplifier from a PoE capable switch or power injector, the preamplifier can
be used to source power for a connected control system. Connect the control system to the pre
-
amplifier as shown here.
