NeedforSeat MAXNOMIC Assembly Instructions Manual Download Page 2

vielen Dank für den Kauf eines 

MAXNOMIC

®

 Stuhls!

Du hast Dich für ein hochwertiges 
Produkt entschieden und wir wünschen
Dir viele Jahre Freude damit.

Damit von Anfang an alles klappt, 
möchten wir Dich bitten, nach dieser 
Anleitung vorzugehen und auch die 
SICHERHEITSHINWEISE auf Seite 20  
zu beachten.

Dein MAXNOMIC

®

 Team

Liebe Kundin, lieber Kunde,

BEVOR ES LOS GEHT:

Der hier gezeigte Stuhl kann sich optisch/ farblich 
von Deinem bestellten Modell unterscheiden. 
Der Aufbau ist jedoch für alle Modelle 
der PRO-GAMING & OFFICE Kategorie gleich.

Verpackungsbedingt können die Polsterungen/ 
Obermaterialien Druckstellen und/oder Falten 
aufweisen. Diese verschwinden jedoch nach 
einigen Tagen bzw. bei Benutzung des Stuhls.

Sorge vor Beginn des Aufbaus für ausreichend 
Platz um alle Teile auslegen zu können. Eine 
zweite Person, die beim Aufbau hilft, ist optimal.

X

7

thank you for purchasing a 

MAXNOMIC® chair. 

You have selected a high-quality product 
and we wish you many years of 
satisfaction.

For smooth assembly of your chair, we ask 
you to follow the step-by-step instructions. 
It is important to take good notice of the 
SAFETY INSTRUCTIONS on page 20.

Your MAXNOMIC

®

 Team

Dear Customer,

BEFORE WE BEGIN:

The chair shown in the photos might be a different 

model, however, the assembly is the same for all 
of the PRO-GAMING & OFFICE category.

When unpacking: you might find that the upho

-

lstery has slight creases. This is due to the tight 
packing. However, these will disappear from 
alone after a few days and or by usage.

First, create yourself enough space to unpack 
the items and to organize them accordingly. 
A second person to assist you would be helpful.

You can find the englisch assembly 

instructions on page 11.

X

7

2

Summary of Contents for MAXNOMIC





















Reviews: