Place the two washers as shown and place the armrest
near the seat.
First place the outside two screws with the other
washers and tighten them smoothly by hand only. Do
not force.
Insert the third screw and tighten by hand. Once in
place, use the tool to tighten all three screws.
The width of the armrest may be adjusted later in
the assembly process (if necessary).
Prepare the four long M8 screws for assembly of the
backrest as shown.
Place the backrest carefully between the brackets of
the seat bottom. It is important to NOT adjust the
position of the backrest during assembly.
Begin with the side opposite the tilt mechanism. Using
your pre-assembled M8 screws, gently insert and tighten
by hand (do not use the tool).
Now do the other side; here a second person to assist
with adjustment of the backrest would be very helpful.
9.
10.
11.
12.
13.
14.
15.
16.