Nedo PRIMUS2 H Operating Instructions Manual Download Page 5

18

EN

2  Safety information

Safety instructions

2.1  Documentation

Compliance with the following safety instructions and the specific national safety regu-
lations and health & safety provisions is a basic requirement for trouble-free and safe 
use of the laser. Therefore, please read carefully through these operating instructions 
and all notes and follow them while working with the laser.

2.2  Laser radiation

The Primus 2 H rotating laser is, depending on the version, a Class 2 or Class 3R laser 
product in accordance with EN 60825-1:2014.

     

LASER RADIATION

DO NOT STARE INTO BEAM

LASER CLASS 2

   

DIN EN 60825-1:2014

#

 1mW

l

: 630-680 nm

w #

 1,5 mrad

     

LASER RADIATION

AVOID DIRECT 

EYE EXPOSURE!

LASER CLASS 3R

   

EN 60825-1:2014

#

 5 mW

l

: 630-680 nm

w # 

 1.5 mrad

General safety instructions for handling laser radiation

WARNING!

 

Laser radiation can damage the eyes.

 

f

Prevent direct eye exposure to the beam.

 

f

Do not direct the beam at other people or into public areas.

 

f

To prevent reflections, do not point the laser at reflective surfaces.

 

f

If possible, do not operate the laser at eye level.

 

f

The housing of the laser may be opened by trained service technicians only.

The emitted laser radiation has the following properties:

• 

Class 2 Power P 

#

 1mW / Class 3R Power P 

#

 5mW

• 

Wavelength 

l

: 630-680 nm

• 

Beam divergence 

w # 

 1.5 mrad

• 

Rotating laser dot: Laser pulse with f: 0.2Hz ... 10Hz

Summary of Contents for PRIMUS2 H















Reviews: