6
Installing the product
1. Plug the male light string connector
A
4
into the adapter
A
1
.
2. Plug the adapter
A
1
into a power outlet.
3. The light string
A
2
starts flashing quickly.
4
Press and hold the reset button
A
5
for 5 seconds to reset the product if the
light string
A
2
does not flash quickly.
4. Tap + in the Nedis SmartLife app.
5. Select the product from the list of available products.
6. Tap to confirm.
7. Enter the password of the 2,4 GHz Wi-Fi network to which your phone is
connected and tap
Confirm
.
8. Rename the product after it has been found and added.
4
If the above connection method fails, the product can be connected using
AP mode:
1. Press and hold the reset button
A
5
for 5 seconds.
4
The light string
A
2
flashes quickly.
2. Press and hold the reset button
A
5
again for 5 seconds.
4
The light string
A
2
flashes slowly.
3. Tap + in the Nedis SmartLife app.
4. Select the product from the list of available products.
5. Tap
AP Mode
in the top right corner.
6. Follow steps 4 till 8 of the regular connection method.
Using the product
Press the reset button
A
5
to cycle through the different lighting modes.
4
Alternatively, the product can be controlled with the Nedis Smartlife app.
1. Press and hold the reset button
A
5
for 5 seconds to enter pairing mode.
The product can be controlled with the Nedis SmartLife app via a Wi-Fi
connection from any location.
The home menu of the Nedis SmartLife app shows a control tile for each
connected lamp and/or group.
4
The product can be connected to Google Home or Amazon Alexa to enable
speech control.
Summary of Contents for WIFILX01C42
Page 3: ...2 4 3 1 5 A...
