English
2
WIFILSxxx
Smart LED strip
Use
1. Download and install the app “Nedis SmartLife“ from Apple App
Store or Google Play Store on your mobile device.
2. Launch the app “Nedis SmartLife“.
3. Create a new account or log in to your existing account.
4. Tap “+” to add the device.
5. Fully unroll the LED strip and shorten if needed on one of the
marked lengths. (fig. a)
6. Select “LED strip” from the list of products.
7. Connect the LED-strip to the controller making sure to align the
arrow on both connectors.
8. Power the controller using the included power adapter.
9. If the light does not flash: Hold the reset button 5 seconds to
reset the device.
If the light flashes: Confirm in the app.
10. Confrm the Wi-Fi network and password.
11. Enter the device name.
Note: The device name will also be used by Amazon Alexa and
Google Home.
Safety
•
To reduce risk of electric shock, this product should only be
opened by an authorized technician when service is required.
•
Disconnect the product from the mains and other equipment if
a problem should occur.
•
Read the manual carefully before use. Keep the manual for
future reference.
•
Only use the device for its intended purposes.
Do not use the device for other purposes than described in the
manual.
•
Do not use the device if any part is damaged or defective. If the
device is damaged or defective, replace the device immediately.
•
The controller is suitable for indoor use only. Do not use the
device outdoors.
•
Do not expose the controller to water or moisture.
•
Do not touch the device with wet hands.
Cleaning and maintenance
Warning!
•
Do not use cleaning solvents or abrasives.
•
Do not clean the inside of the device.
•
Do not attempt to repair the device. If the device does not
operate correctly, replace it with a new device.
•
Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please
visit www.nedis.com/support
