English
3
WIFICO20CWT
Outdoor IP camera
Description
1. Status indicator
2. Reset button
3. Speaker
4. Microphone
Use
1. Download and install the app “Nedis SmartLife“ from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app “Nedis SmartLife“.
3. Create a new account or log in to your existing
account.
4. Tap “+” to add the device.
5. Select “Security Camera” from the list of products.
6. Connect the power adapter to the device. Insert the
mains plug of the power adapter into the wall socket.
7. If the status indicator does not flash: Press the reset
button.
If the status indicator flashes: Confirm in the app.
8. Confrm the Wi-Fi network and password.
9. Enter the device name.
Note: The device name will also be used for push
notifications.
10. Use the metal bracket to mount the camera on the
wall or in an angle.
11. Place the camera on the bracket and rotate to fixate.
Safety
• To reduce risk of electric shock, this product should
only be opened by an authorized technician when
service is required.
• Disconnect the product from the mains and other
equipment if a problem should occur.
• Read the manual carefully before use. Keep the
manual for future reference.
• Only use the device for its intended purposes.
Do not use the device for other purposes than
described in the manual.
• Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
Cleaning and maintenance
Warning!
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
• Clean the outside of the device using a soft, damp
cloth.
Support
If you need further help or have comments or
suggestions please visit www.nedis.com/support
Summary of Contents for WIFICO20CWT
Page 2: ...2 1 2 3 4 ...
