nedis SCBI9000BK, Quick Start Manual

Page: 6 / 88

6
• Only power the product with the voltage corresponding to the markings on
the product.
• Wipe the battery terminals with a clean dry cloth if they are dirty.
• Non-rechargeable batteries are not to be recharged.
• Do not short-circuit a battery.
• Children of less than 8 years should be kept away.
• Cleaning and user maintenance shall not be done by children without
supervision.
• Make sure to match the (+) and (-) polarity markings.
• Do not clean the inside of the product.
• For more detailed information about disposal of your old battery, check the
local rules and regulations for the correct disposal instructions.
Setting up the product
1. Remove the battery cover A i .
2. Insert 3 type AA batteries (not included) into the battery compartment. Make
sure that the battery polarity (+/-) matches the polarity markings inside the
battery compartment.
3. If you want to save photos or videos, insert a 4-32 GB Class 10 microSD card
into the microSD card slot A u .
4. Place back A i .
5. Press the power button A 7 .
Look through the ocular lens A 9 . The screen lights up.
4
If the screen does not light up, check if the batteries are charged and have
been installed correctly.
Using the product
4
Rain, fog, snow or smoke can negatively influence the viewing distance and
image quality.
1. Remove the objective lens cover A 1 .
4
Leave the lens cover A 1 on during daylight.
2. Press A 7 to switch on the product.
4
The product starts up in observation mode.
3. Look through the ocular lens A 9 .
4. Rotate the diopter ring A q to adjust the light sensitivity.
5. Rotate the focus ring A 2 to adjust the focus distance.
6. Press the up and down buttons A 45 to adjust the digital zoom.
4
In dark environments, the infrared lamp switches on automatically.