Use
Using the product
1. Switch the mode dial
B
①
to the desired mode:
Mode
Fan
Heater
OFF position
B
②
Off
Off
Fan mode
B
③
On
Off
Low heat mode
B
④
On
1000 W power
High heat mode
B
⑤
On
1500 W power
Oscillation mode
B
⑥
On
1500 W power + oscillation*
* = The product rotates slowly over the base from side to side.
2. Rotate the thermostat dial
B
⑦
to adjust the desired room temperature.
- When the room temperature reaches the selected level, the built-in thermostat
automatically switches off the product.
- When the room temperature decreases, the built-in thermostat automatically
switches the product back on.
⚠
The tip-over safety switch automatically switches off the product when it falls over.
Before using the product again: Switch off the product, disconnect the power plug and
check for damage.
⚠
Do not use a damaged or defective product, but return it for repair or replacement.
Stop using the product
1. Switch
B
①
to the OFF position
B
②
.
2. Unplug
A
⑤
from the power outlet.
3. Allow the product to cool down.
Maintenance
Cleaning the product
1. Before cleaning and maintenance, switch off the product and disconnect the power.
2. Allow the product to cool down.
3. Clean the outside of the product with a soft, clean, lightly damp cloth.
4. Clean the openings of the product with a fine brush.
⚠
Do not immerse the product in water or other liquids.
⚠
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone
when cleaning the product.
⚠
Avoid abrasives that can damage the surface.
