Swing Arm SA-G
EN
1 Preface
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
NOTE!
Notes contain other information that is import-
ant for personnel.
3 Description
Swing Arm SA-G is an extraction arm for on-tool or
on-torch extraction, ideal for removing dust when
grinding and welding. An integral compressed air hose
comes as standard with the arm, enabling convenient
connection to air-powered tools. Alternatively, the
arm can be fitted with a cable for electric tools.
As a variant the Swing Arm SA-GW are based on
the same design as the Swing Arm SA-G, but come
equipped with a rail and reinforcement in order to
support the weight of a wire feed unit.
NOTE!
For optimum efficiency, the use of an automat-
ic vacuum valve is strongly recommended.
3.1 Main parts and measurements
1
Inner arm
2
Outer arm
3
Tension rod
4
Wall bracket, SA complete
5
Stop ring
6
Sealing sleeve
7
Vacuum hose, diameter 50 mm
8
Compressed air hose, 10 meters with diameter 13
mm
9
Transition
10 Hose coupling
11 Cable tie
12 Hose clamp
13 Ring cable lugs
14 Connection wire
3.2 Technical data
Unit
Value
Installation area
Indoor
Applications
Dust, granulate, fumes
Arm diameter
50 mm
Arm length
• SA-G 300: 3 m (10 ft.)
• SA-G 450: 4,5 m (15 ft.)
• SA-G 600: 6 m (20 ft.)
Weight
• SA-G 300: 22,5 kg (50 lb)
• SA-G 450: 28,5 kg (62 lb)
• SA-G 600: 33 kg (73 lb)
Max load (outer arm)
• SA-G 300: 10 kg (22 lb)
• SA-G 450: 8 kg (18 lb)
• SA-G 600: 5 kg (11 lb)
Process air temperat-
ure
0–60 °C (32–140 °F)
Ambient temperat-
ure
0–60 °C (32–140 °F)
10
