Nederman SAVE 73009058, Original User Manual

Page: 24 / 44

SAVE EN
24 QMM095(A)
Table 4-3: External main components of the SAVE Module
Fig./pos. Component Function
4/1 Antenna
Exchange of information between SAVE Controller and
SAVE Module(s) by radio communication.
4/2 Enclosure
Plastic enclosure, prevent from intrusion from foreign
bodies such as tools, dirt and liquid water.
4/3 Main switch Allows turn off and turn on of the device.
Table 4-4: Internal components of the SAVE Module
Fig./pos. SAVE Module
5/1 Electronic board
5/2 Main power supply
4.3 Technical data
Table 4-5: SAVE Controller and SAVE Module parameters
Parameter SAVE Controller SAVE Module
Power 200W (230VAC) 70W (230VAC)
Power supply [V/phase/Hz] 85-264 VAC/1/47-63Hz 85-264 VAC/1/47-63Hz
Nominal current [A] 0,87 (230VAC) 0,3 (230VAC)
Ambient temperature range* -10
o
C ... +50
o
C -10
o
C ... +50
o
C
Protection category IP65 IP65
*Indoor use only.
Table 4-6: SAVE Sensor parameters
Parameter Value
Power supply [V/phase/Hz] 12-24 DC/115-400 VAC
Ambient temperature range -10
o
C ... +50
o
C
4.4 SAVE Controller types
SAVE Controller is available in two versions:
• SAVE Controller - with built-in Ethernet communication.
• SAVE Controller - with built-in Ethernet communication and built-in GSM
modem.
4.5 Dimensions and weight
Dimensions for the SAVE Controller show Fig. 3A and for SAVE Module show
Fig. 3B.
Table 4-7: SAVE components weight
Component
Weight
(kg)
SAVE Controller 10
SAVE Module
1
SAVE Sensor 0,5