Nederman HD82, Instruction Manual, Page: 11 / 22

HD82
11 QMM001(02)
EN
1 Declaration of conformity
The formal Declaration is attached to your product.
2 Preface
This manual is for the correct installation, use and maintenance of this product.
Read it carefully before using this product or carrying out maintenance.
Replace the manual immediately if lost.
This product has been designed to meet the requirements of relevant EC
directives. To maintain this status, all installation, repair and maintenance
work for this product is to be carried out by qualified personnel using only
original spare parts. Contact the nearest authorized distributor or Nederman for
advice on technical service and obtaining spare parts.
NOTE !
Read Chapter ‘4 Safety’ thoroughly.
Nederman continuously improves its products’ design and efficiency through
modifications, and reserves the right to do so without introducing these
improvements to previously supplied products. Nederman also reserve the right
to, without previous notice, modify data and equipment as well as operating
and maintenance instructions.
2.1 Foreword
NEDERMAN Swarf Centrifuges guarantee good design, quality components
and skilled labour plus years of experience in swarf handling and swarf
crushing. All these abilities have been used to design a product with high
reliability and long service life. We are convinced that your experiences will
confirm your choice of NEDERMAN Swarf Centrifuge.
Length of life and reliability can, as with any machine tool, be prolonged with
correct installation and correct maintenance. It pays off to follow our advice for
maintenance.
This maintenance manual consists of instructions for your new NEDERMAN
Swarf Centrifuge. It also contains greasing instructions, spare parts list with
exploded view and a simple schedule for trouble-shooting.
NEDERMAN Swarf Centrifuges are normally used in swarf handling systems
which we design, sell and install.
All Swarf Centrifuges which leave our works are checked and do not need any
additional maintenance other than stated in this manual.
For orders of spare parts and if you wish to contact our engineers please find
our phone number and address at the back cover page of this instruction.
Your HD82 Swarf Centrifuge has been produced by:
NEDERMAN Manufacturing Poland Sp. z o. o.
ul. Okólna 45 A
05-270 Marki, Poland
Tel: +48 22 7616000
Fax: +48 22 7616099
www.nederman.com