Nederman FilterCart Carbon, User Manual

Page: 15 / 72

FilterCart Carbon
15
EN
Change the HEPA filter cartridge in the following way:
1. Disconnect the mains connection cable.
2. Unscrew the top cover.
3. Remove the used HEPA filter and put it in the plastic bag which comes
with the new HEPA filter. Close the plastic bag with the band supplied.
4. Handle the used HEPA filter according to the relevant regulations for the
substances that have been collected.
5. Check that the new HEPA filter not is damaged. It should be noted that
the filter surface must not be touched. Handle the HEPA filter very
carefully and fit it in the FilterCart Carbon. Ensure it is fitted in the correct
position and that the seal is downwards. Check that the seal not is
damaged. Note the UP-arrows.
6. Refit the top cover. Fasten it securaly.
9 Maintenance
Maintenance is recommended at least once a year.
WARNING! Risk of personal injuries.
• Disconnect the mains connection cable before starting any maintenance
work.
• Use necessary personal safety equipment.
Do as follows:
• Change the filter cartridge (and optional HEPA-filter) if necessary, see
Chapter
‘7 Changing the filter cartridge’
.
• Check the airflow capacity of the FilterCart Carbon.
• Check that the Fume Extractor hose is not damaged. If necessary change
the hose.
• Check that the hose to the fan inlet is not damaged. If necessary change
the hose.
• Check that no objects have been caught on the guard net on the fan inlet.
• If necessary, adjust the Fume Extractor links.
• If necessary, tighten the arm profile bolts, see * Figure 7.
• Check that the mains connection cable and the fan motor cable are not
worn or damaged.
• Check that the eccentric locks tighten the filter casing properly. Adjust the
eccentric locks if necessary. See Chapter ‘7 Changing the filter cartridge’ .
9.1 Spare parts
Contact your nearest authorized distributor or Nederman for advice
on technical service or if you require help with spare parts. See also
www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
• Part number and control number (see the product identification plate).
• Detail number and name of the spare part (see www.nederman.com).
• Quantity of the parts required.