TRANSIT Ultimate | installation guide
36/40
A
Technical specification
Technical specification
TRANSIT Ultimate
Power supply
100 – 240 VAC (60 – 50 Hz) or 24 VDC (± 10%)
Power consumption
< 25 VA (AC), < 20 W (DC)
Power output
24Vdc, 0.1A
Dimensions
330 x 274 x 140 mm
Weight
5 kg
Housing
Cover: ABS, Housing: Die-cast ADC12
Protection
IP66, outdoor use
Operating temperature
-30°C – +60°C
Maintenance
Transit Ultimate is free of regular maintenance
Detection range
Up to 10 meters, message acceptance ratio > 80%
Object speed
Up to 200 km/h at appropriate distance (*)
Operating frequency
2.438 – 2.457 GHz, 433.62 & 434.22 MHz (RX_CAT_3); Ton < 5 sec
Frequency channels 2.45GHz 48 FCC channels, 14 ETSI channels, 600k Hz spacing
Polarization 2.45 GHz
Circular (LHC)
Polarization 433 GHz
Horizontal
Air interface 2.45 GHz
Nedap proprietary encryption standard
1.875 kbps; integrated antenna
Air interface 433 MHz
Encryption based upon diversified AES128 keys.
300 kbps; GFSK - 75kHz; dedicated antenna
Duty cycle < 1%; LBT not applicable
Relay output
1 relay output (NO, common, NC), 24 VDC 2A
Inputs
3 dry contact
Audio
Range check beeper
Antenna input
External inductive proximity antenna connection 120kHz
Antenna output
Nedap external reader antenna connection 120kHz output
Interfaces
USB, Wiegand, Magstripe, Barcode (*).
Optional interface boards:
RS232, RS422, RS485, TCP/IP (*).
Communication protocols
Various, including CR/LF, DC2/DC4 and OSDP.
Mounting
Wall Mounting Set included, optional Pole Mounting Kit available.
Certifications:
EMC
EMC Directive EC : 2014/30/EC ; 2004/108/EC
EN301 489-1,-3,-17 ; EN61000-6-2 ; EN61000-6-3
Regulations
FCC part 15.245; EN 300 440 (2.45 GHz)
FCC part 15.231a,-b ; EN 300 220 (433 MHz)
UL294 6th ed.
Access Control Performance Line security:
Level 1
Destructive attack: Level 1
Endurance:
Level 4
Standby Power:
Level 1
The TRANSIT Ultimate reader must be connected and controlled by a UL listed
controller (e.g. AP4803X).
(*) not evaluated by UL
