TRANSIT Ultimate | installation guide
11/40
2.4
Installing the security key pack
The optional Security Key Pack (SAM) has to be ordered separately (art. no. 9216537) and is required for the TRANSIT
Ultimate to perform the encrypted authentication on the Ultimate tags. Please follow the procedure below to install the
Security Key Pack into the TRANSIT Ultimate.
Security Key Pack installation procedure
Insert the Security Key Pack (SAM) into the TAB board.
1.
Align the notch as indicated in Figure 6 and keep the metal contacts backwards.
2.
Push the SAM into the slot until it clicks into place.
3.
Set the LOCK-switch to the right to lock the SAM.
4.
Enable the Ultimate-mode by setting dip-switch SW2-2 ON. See chapter 6.1.
Removal procedure
1.
Set the LOCK-switch to the left to release the SAM.
2.
Push the SAM to eject it.
3.
Disable the Ultimate-mode by setting dip-switch SW2-2 OFF. See chapter 6.1.
Figure 6: Installing the Security Key Pack (SAM)
SAM
LOCK
